Huawei Y5II CUN-L22 Firmware Download – Smartphone Huawei Y5 II launched in April 2016. This phone comes with touchscreen display size 5.00 inches with a resolution of 720 pixels to 1280 pixels.
Huawei Y5 II powered by a quad-core processor 1.3 GHz and comes with 1 GB RAM. These phones Pack the 8 GB of internal storage that can be expanded. As far as concerns the camera, Huawei Y5 II has 8 megapixel main camera on the back and the front 2 megapixel shooter to selfie.
Huawei Y5 II 5.1 and run Android supported by removable battery 2200mAh. This measure 143.80 x 72.00 x 8.90 (height x width x thickness) and weighs 135.00 grams.
Huawei Y5 II is dual SIM smartphone (GSM and GSM) who receive Micro-SIM and Micro-SIM. Connectivity options include Wi-Fi, GPS, Bluetooth, FM and 3 g. The sensor on the phone including the Proximity sensor, Accelerometer, Ambient light sensor and Gyroscope.
Huawei Y5II CUN-L22 Firmware Download
This is the official page, from which you can download Huawei Y5II CUN-L22 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.
CUN-L22C567B130.7z
type: ROM size: 890MB
md5: 1ec18729d2e2f28b1597b59b19846693
Download
CUN-L22_MT6735_C567B124_05021YTS.tar.gz
type: ROM size: 977.9MB
md5: cd13e548235bd513d70a00eb29e2a5f6
Download
Readme:
- Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
- Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online
How to Flash Huawei Y5II CUN-L22
- Download all the files above, if it is finished please extract
- Then install the usb drivers on your pc/laptop
- While waiting for the driver install process is complete, open the application extracts the flashtool
- After open please navigate and select the Select Agent Download section DA_SWSEC. bin after that select part Scatter-Loading file and locate the MT67xx_Android_Scatter file in the folder the firmware of huawei l22 already extracted and click Open
- Then press the Download button to start the process on flashtool flashing huawei l22
- Turn off your mobile phone and make sure that the usb driver is already installed on the pc and then connect your smartphone with usb cable while pressing the Volume Up/Down button simultaneously until the flashing process running
- Wait till flash finishes are more or less just 5-10 minutes
- Once completed and successfully it will pop up a notice with the JUST PASSED is green
- Disconnect the usb cable and turn on your android smartphone as usual until it went into the setting of early android
- Completed