Infinix Hot S3 X573 Firmware Download – Infinix Hot S3 has design overview of arguably “standard”. However, pay attention to the screen! Yes, Infinix Hot S3 is already using a screen with a ratio of 18:9. Cheap smartphones means-this screen appear with a rousing immediacy. So, users can enjoy a bigger screen but with a body which still fixed easily gripped.
The screen that carried Hot S3 X573 this is the screen size with a 5.7-inch IPS. Resolution is 1440 × 720 (HD +). The surface of the screen is slightly curved at the edges, characterizes the use of 2.5-D screen. On the front side of the top smartphones, you can see a camera and flash. Yes, the Hot series S3 is equipped with photo flash for a selfie.
On the right side, see the ranks of the volume button and the power. Meanwhile, on the left side is only a door containing the tray with 3 slots in it. The trio is to 2 SIM card and MicroSD 1. Yes, Hot S3 doesn’t use hybrid slots. Infinix Hot S3 X573 Firmware Download
At the top, you will find a 3.5 mm jack for audio. While it’s at the bottom side of the microphone hole looks Micro USB connector, and the main speaker holes.
The position of the main camera on the back side is in the top left corner (like on the iPhone). Under 13 Megapixel cameras can be found a flash for shooting in dark conditions. Meanwhile, positioned in the middle is a fingerprint sensor.
Infinix Hot S3 uses a unibody design. So, you can not change the battery yourself easily. This is not our view as disadvantages, because the average current batteries can survive long enough. Furthermore, the S3 is already equipped with a fairly large battery, 4000 mAh.
Infinix Hot S3 X573 Firmware Download
This is the official page, from which you can download Infinix Hot S3 X573 Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.
Readme:
- Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
- Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online
How to Flash Infinix Hot S3 X573
- Install the USB driver and Qfil tools.
- Turn off your cell phone.
- Now connect your phone to the PC using the USB cable while holding the Volume button Up.
- Next, run the “QFIL “.
- After the QFIL is open make sure your mobile phone has detected the PC without writing “Qualcomm HS USB-9008 QDLoader ” in tools QFIL, if there is already such writings now click Browse and find the file “prog_emmc_firehose_8916 mbn. ” that is in the folder extract results the firmware, then click Open.
- Now click “Load XML ” and will appear ” rawprogram_unsparse ” click Open in the file then it will show up again the file “patch0. xml ” click open again.
- Now click “Download ” on QFIL and the process of flashing will wait until it is finished running.
- If the flashing process is completed, the mobile phone will boot automatically