Vivo NEX 2 PD1821F Firmware Download – Vivo NEX 2 is the flagship device that has interesting new camera settings that have only the rear lens, which can work for photography and video calls. The performance of the device is very promising and the battery backup is quite a lot. However, no expandable storage.
Vivo NEX 2 showcased the screen bezel-complete 6.59 inches complete without nicks. It comes with an AMOLED display has a resolution of 1,080 pixels and a density of 2,316 x 388 PPI. Under the hood, it packs two processors quad-core Kryo 385 has a clock speed of 2, 8GHz and 1, 8GHz which is based on Qualcomm’s Snapdragon chipset 845. Vivo NEX 2 PD1821F Firmware Download – This can provide great performance together and assist by Adreno GPU 630 that handles graphics. There are 8 GB of RAM to ensure there will be no lag while gaming or multitasking.
The device has been equipped with a camera behind the lens has three active + active + 5MP which can capture images with amazing clarity and natural color reproduction. There is no lens on the front, then selfie and video calls will be done by the main sensor. To keep the device running, there is a Li-ion battery that has a large capacity 4,100 mAh can provide backup power. It is also equipped with fast charging support that can recharge batteries in no time.
Vivo NEX 2 has a storage capacity of 128 GB to store files and user data. This ensures almost no shortage of space. There is no external memory slot. In terms of connectivity, the device is equipped with a 4 g enabled VoLTE. Other options include Wi-Fi, 802.11 b/g/n, Bluetooth, Mobile Hotspot v 5.0, GPS with A-GPS and Glonass, USB Type-C, etc.
Vivo NEX 2 PD1821F Firmware Download
This is the official page, from which you can download Vivo NEX 2 PD1821F Firmware Download (flash file) on your Computer. After Downloading the firmware, follow the instruction manual to flash the firmware on your device.
Vivo NEX 2 1813 PD1821 Dual Screen QFIL Firmware
File Name: PD1821F_EX_A_1.6.7_vivo_qcom_LA.UM.7.3.r1_sdm845_split.tar.gz
File Size: 2 GB
Link: Download
File Name: PD1821F_EX_A_1.6.7_vivo_qcom_LA.UM.7.3.r1_sdm845_split.tar.gz
File Size: 2 GB
Link: Download
File Name: N/A
File Size: 2 GB
Link: Download
If the link file is broken or not working please contact here.
Readme:
- Backup: we advise you to take a backup of your personal data before posting flash Stock Firmware because flashing firmware removes personal data from the device.
- Original firmware: we only serve the original firmware that was released by the company and we scan every our firmware with Eset Internet Security before uploading online
How to Flash Vivo NEX 2 PD1821F
- Download and Install Qualcomm USB driver
- Download QFIL Tools then extracted files.
- Turn off your smartphone.
- Now connect your phone to the PC using the EDL cable while holding the Volume button Up.
- Next, run the “QFIL “.
- After the QFIL is open make sure your mobile phone has detected the PC showing “Qualcomm HS USB-9008 QDLoader ” in QFIL tools, if it is already such now click Browse and find the file “prog_emmc_firehose_8916mbn. ” that is in the folder extract results the firmware, then click Open.
- Now click “Load XML ” and will appear ” rawprogram_unsparse ” click Open in the file then it will show up again the file “patch0.xml ” click open again.
- Now click “Download ” on QFIL and the process of flashing will wait until it is finished running.
- If the flashing process is completed, the mobile phone will boot automatically